If you smell mould, mildew, or other possible contamination, this might not necessarily mean you have to have mould abatement in Edmonton services performed. The first step in the process is hiring technicians to visit the home or other site to perform air quality testing and on-site consulting. From there you can figure out which steps to take, the best remedies, and the methods which can be used for eliminating the problems.
Not all mould is created equally –
Toxic mould is far more dangerous than a few spots of mildew. When it comes to air quality testing, this is what the appropriate test methods are going to inform you of. From there, technicians will determine whether or not mould abatement in Edmonton is going to be required. There are several levels which home or business owners have to be familiar of to determine contamination and the best treatment methods.
Level 1 –
In areas of 10 square feet or less, you will typically have mould on baseboards or ceilings. If this is the case, and it isn’t black (or toxic) mould, you can typically do the job yourself. It is important to make sure areas being treated are left dry and that no visible mould or mildew is on the area after cleaning is completed.
Level 2 –
Areas of 10 to 30 square feet fall within this category. This is typically an entire wall or area of a room in the home. You will have to take similar precautions as with level one to clean these areas. As the mould is typically non-toxic in these areas, proper removal products purchased in stores will suffice to get rid of the mould in most cases.
Level 3 –
For areas of 30 to 100 square feet, it is best to hire a contractor. Here they will typically deal with entire rooms or offices. In most cases, vents have to be covered, HVAC systems serviced, drywall removed, floors cleaned, and other services rendered. Home or business owners are typically required to vacate the premises for a period of at least 24 hours in these cases.
Level 4 –
Any area greater than 100 square feet falls within this category. HEPA cartridges, masks, full body suits, and protective gear are used for these situations. Hiring a fully licensed and certified removal team is the best way to deal with this contamination level.
Level 5 –
This is a level you don’t want to reach. This is when HVAC and AC systems are affected. Whether mould is toxic or not, this stage requires professional remediation experts to perform services. In many cases, they will have to line interior surfaces of the HVAC system, do duct work, and tear down rooms or portions of rooms being treated.
Mould is not going to affect every home or area in the same way. Learning the level of and type of contamination is what proper air testing will allow. From there, it is determined which treatment methods to use, and which service professionals are best equipped to perform services.